---
title: "Unitrends Backup With Wasabi"
slug: "how-do-i-use-unitrends-backup-with-wasabi"
updated: 2026-10-12T21:42:26Z
published: 2026-10-12T21:42:26Z
canonical: "docs.wasabi.com/how-do-i-use-unitrends-backup-with-wasabi"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.wasabi.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Unitrends Backup With Wasabi

[Unitrends](https://www.unitrends.com/products/enterprise-backup-software) has been validated for use with Wasabi. For additional info on how Wasabi works with Unitrends, visit this [Unitrends Backup and Recovery with Wasabi combines industryleading BCDR with ultra-low-cost cloud storage](https://wasabi.com/solution-brief/unitrends/). Follow the steps outlined below to configure Wasabi as a cloud storage target for your Unitrends backups.

> [!NOTE]
> Unitrends Backup performs an initial server-side copy and then deletes the original backup object as part of its object-naming convention. You may notice an increase in the amount of deleted storage shown on your account as a result. To maximize the amount of time your backups are available and to minimize the amount of deleted storage being used, we recommend setting the Retention Period in Unitrends Backup to a minimum of 30 days if you are a Reserved Capacity Storage (RCS) customer, or 90 days if you pay as you go, for backups going to Wasabi. See the [Minimum Storage Duration Policy](https://docs.wasabi.com/docs/how-does-wasabis-minimum-storage-duration-policy-work) for details.

> [!NOTE]
> The data restoration process is handled by your specific backup software application. As many variables can affect your unique environment, Wasabi strongly recommends that you seek guidance from your backup software’s technical support team if you encounter difficulties or have application-specific inquiries.

## **Requirements**

- Unitrends software is installed and licensed. This solution was most recently tested with version 10.8.7.
- Access to Unitrends Console.
- Access to Wasabi Console.
- Active Wasabi account with a bucket created for Unitrends backup. Do not configure Object Lock or Versioning on your bucket because Unitrends does not currently support these features. Refer to [Working With Buckets and Objects](https://docs.wasabi.com/v1/docs/working-with-buckets-and-objects#creating-a-bucket) for details on creating a Wasabi bucket.

## **Adding Wasabi as a Backup Copy Target**

1. Log in to the Unitrends console.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-18_at_4_35_55 PM.png)
2. Navigate to **Configure** select **Backup Copy Targets**.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-18_at_4_40_08 PM.png)
3. Expand the Add target dropdown menu and select **Cloud** from the list of options.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-18_at_4_43_49 PM.png)
4. In the Add Cloud Backup Copy Target window, provide a name for the target.

Under the Storage Details section, choose Wasabi as the Cloud Storage target, enter the following details, and then click **Save**.
  - Storage Path - Wasabi bucket name
  - Wasabi Region - Service URL of the Wasabi region your bucket is located in. *Note: This config example uses Wasabi’s us-east-1 storage region. To use other Wasabi storage regions, use the appropriate Wasabi service URL as described in* [*Service URLs for Wasabi’s Storage Regions*](https://docs.wasabi.com/docs/what-are-the-service-urls-for-wasabis-different-storage-regions).
  - Access Key ID
  - Secret Access Key
  - Under Options, select the checkbox next to Enable storage threshold. Set the Threshold to be an appropriate value for your organization. This will set the maximum amount of Wasabi storage your backups will consume. In this example, 100 TB (100,000 GB) was configured.

> [!NOTE]
> IMPORTANT: This storage threshold must be set if you wish to limit the amount of Wasabi storage Unitrends backups will utilize. Otherwise, Unitrends will believe your Wasabi bucket has infinite space. From Unitrends documentation:![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot 2025-02-24 at 10.22.40 AM.png)

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-21_at_10_51_56 AM.png)
5. The recently added Wasabi account will show up as an Online target.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot 2025-02-21 at 11.00.14 AM.png)

### **Adding Assets to be Backed Up by Unitrends**

1. Navigate to **Configure**, then **Protected Assets**, then **Add**.
2. Click **Virtual Host.**

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-18_at_5_27_45 PM.png)
3. Configure the following and click **Save**.
  - Hypervisor—Choose the hypervisor type that has VMs needing to be backed up
  - Hypervisor IP address, hostname, or FQDN that is resolvable and reachable by the Unitrends server
  - Hypervisor Username
  - Hypervisor Password

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-18_at_5_37_59 PM(3).png)

The virtual host is now listed under the Protected Assets.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-18_at_5_51_17 PM.png)

### Scheduling Job Methods

Choose ONE of the following methods. For details, see [Unitrends Backup Administration and Procedures](https://guides.unitrends.com/documents/rs-ueb-admin-guide/Content/Satori/Backup_Administration_and_Procedures.htm#) for information on creating backup and backup copy jobs and on scheduling jobs.

1. Create an SLA policy. This is a quick and easy way to back up locally and to Wasabi. It also helps you meet your organization’s RPO goals. However, it is not as flexible as creating separate backup and backup copy jobs. See the *Create SLA Policy* section below for configuration details.
2. Create separate backup and backup copy jobs. This is slightly more complex but offers more scheduling options and greater granular control. See the [Creating a Backup Job](/v1/docs/how-do-i-use-unitrends-backup-with-wasabi#create-backup-job) and [Creating a Backup Copy Job](/v1/docs/how-do-i-use-unitrends-backup-with-wasabi#create-backup-copy-job) sections below for the configuration details.

### **Creating SLA Policy**

1. Navigate to **Jobs**, then **SLA Policies,** and click **Create Policy**.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-19_at_9_50_44 AM.png)
2. In the Create SLA Policy window, provide a name (SLA Policy was used in this example). In the Select Items tab, choose the appropriate option from the dropdown menu (VMware was used in our example) under Inventory, then select the desired VM(s). Click **Next**.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-19_at_4_13_46 PM.png)
3. In the Define Policy Options tab, under the Backup Frequency section, select the RPO that determines how often backups will run.
4. Click **Show Backup Window** and choose the window that applies to your backup strategy.
5. Under the Backup Copies section, select **Copy backups daily to the Cold Backup Copy Target** and set the Cold Backup Copy Retention Days to the appropriate value for your organization.
6. Click **Save**.

> [!NOTE]
> NOTE: The “Cold Backup Copy Retention Days” setting works in conjunction with the storage threshold configured above under [Adding Wasabi as a Backup Copy Target](/v1/docs/how-do-i-use-unitrends-backup-with-wasabi#add-wasabi-as-a-backup-copy-target) to delete older backups in Wasabi.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-19_at_4_51_49 PM.png)
7. Run a test backup by going to **Jobs**, then **Job Manager**, selecting the automatically created SLA backup job.Click **Run**.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-21_at_3_01_56 PM.png)
8. Navigate to **Active Jobs**. After the job is complete, its status will show Success.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-21_at_2_58_43 PM(1).png)
9. Run a test backup copy job to Wasabi, navigating to **Jobs**, then **Job Manager.** Select the automatically created SLA backup copy job, and click **Run**.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-21_at_2_49_34 PM.png)
10. Navigate to **Active Jobs**. After the job is complete, its status should show Success.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-21_at_2_51_06 PM.png)
11. Proceed to the [Verifying That Data is in the Wasabi Bucket](/v1/docs/how-do-i-use-unitrends-backup-with-wasabi#verify-data-is-in-wasabi-bucket) section below.

### **Creating a Backup Job**

Refer to the information about Backup jobs in the [Administrator Guide for Recovery Series and Unitrends Backup](http://guides.unitrends.com/documents/rs-ueb-admin-guide/?_ga=2.12282486.37679643.1588694273-148506362.1588694273#Satori/Backups.htm%3FTocPath%3DProtection%2520Overview%7CBackups%7C_____0).

1. Navigate to **Jobs**, then **Active Jobs**. Click **Create job** and choose **Backup**.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-20_at_5_17_22 PM.png)
2. In the Create Backup Job window, provide a job name. In the Select Items tab, choose VMware or the appropriate hypervisor type from the Inventory dropdown menu, then select the desired VM(s). Click **Next.**

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-20_at_5_23_42 PM.png)
3. In the Define Job Settings tab, under the Job Detail section, choose **Create a Schedule** and select the backup type (Full and Incremental were selected in our testing). Set the job schedule. Under Options, select the backup target (Internal was used below). Click **Save**. Note that the backup copy job to Wasabi will be configured later.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-20_at_5_29_14 PM.png)
4. Click **OK** on the Success screen.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-20_at_5_36_43 PM.png)
5. Run a test backup by going to **Jobs**, **Job Manager**, selecting the previously created backup job, and clicking **Run**.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-20_at_5_39_17 PM.png)
6. Choose **Active Jobs**. After the job is complete, its status will show a status of **Success**.![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-20_at_5_45_07 PM(1).png)
7. Proceed to the *Creating a Backup Copy Job* section below.

### **Creating a Backup Copy Job**

*Refer to information about Backup Copy Jobs in* [*Administrator Guide for Recovery Series and Unitrends Backup*](http://guides.unitrends.com/documents/rs-ueb-admin-guide/?_ga=2.12282486.37679643.1588694273-148506362.1588694273#Satori/Backup_copies.htm%3FTocPath%3DProtection%2520Overview%7C_____4)*.*

1. Navigate to **Jobs**, then **Active Job.** Click **Backup Copy.**

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-21_at_8_17_33 AM.png)
2. In the Create Backup Copy Job window, enter a name, such as Copy Job to Wasabi. In the Select Items tab, choose the VM(s) that have been previously backed up and click **Next.**

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-21_at_8_59_53 AM.png)
3. Configure the following, then click **Save.**

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-21_at_9_11_36 AM(2).png)
  1. Backup Copy Type then Backup Copy (Cold)
  2. Backup Copy Target then Wasabi
  3. Backups to Copy, then All backup modes
  4. Retention Period, then set to the appropriate value for your organization.
  5. If the storage threshold is reached, then delete older backup data to free space

> [!NOTE]
> NOTE: The “Retention Period” and “If Storage Threshold Is Reached” settings work in conjunction with the storage threshold configured above under [Add Wasabi as a Backup Copy Target](/v1/docs/draft-unitrends-backup-with-wasabi-1#add-wasabi-as-a-backup-copy-target) to delete older backups in Wasabi.
  6. Select when to run this job, then create a Schedule
  7. Configure desired schedule
  8. Range Type then Last Backups
4. Navigate to **Jobs**, then **Job Manager**. Select the Backup Copy Job going to Wasabi, and click **Run**.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-21_at_10_08_47 AM(1).png)
5. Go to the Recent Jobs tab. When the backup copy job is finished, ensure the status shows Success.![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot_2025-02-21_at_10_34_48 AM.png)

### Verifying That Data is in the Wasabi Bucket

1. Log in to the [Wasabi Console](https://console.wasabisys.com) and confirm the data is stored in your Wasabi bucket.

![](https://cdn.document360.io/bef0a1ea-7768-4d5a-b520-c4fe2f7fafad/Images/Documentation/Screenshot 2025-02-21 at 10.41.51 AM.png)